Black Friday Madness- 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: fifty75ct

300-120 Implementing Cisco Wireless Advanced Solutions (300-120 WLSI) v1.2 Questions and Answers

Questions 4

A retail company has deployed a FlexConnect WLAN with local switching at a small branch location. The Flex profile already includes VLAN 1950 and is mapped to the correct site tag. A specific client must be dynamically assigned to VLAN 1950 by Cisco ISE, and that client’s traffic must be centrally switched to the controller.

Which two configurations must the engineer enable on the controller? (Choose two.)

Options:

A.

Enable split tunneling in the local network.

B.

Configure VLAN 1950 as the native VLAN on the AP trunk.

C.

Enable VLAN-based Central switching.

D.

Disable RADIUS override for local-to-central switching.

E.

Enable AAA override.

Buy Now
Questions 5

Refer to the exhibit.

An engineer tries to manage the rogues on the Cisco WLC. Based on the configuration, which AP is marked as malicious by the controller?

Options:

A.

rogue AP with SSID admin seen for 4000 seconds and heard at -70dBm

B.

rogue AP with SSID admin seen for 3000 seconds and heard at -60dBm

C.

rogue AP with SSID admin seen for 4000 seconds and heard at -60dBm

D.

rogue AP with SSID admin seen for 3000 seconds and heard at -70dBm

Buy Now
Questions 6

An engineer is deploying a Cisco wireless network to support branch offices. All APs are in FlexConnect mode, and the SSIDs switch traffic locally. The customer requires that all QoS for the VoWLAN service be based on Layer 2 markings. Which configuration is required on the switch ports that connect to the APs?

Options:

A.

MLSAWID1P

B.

MLSAWID UP

C.

MLS Trust DSCP

D.

MLS Trust COS

Buy Now
Questions 7

A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber. QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?

Options:

A.

Configure QoS on the mobile devices that have Jabber installed.

B.

Enable Cisco Centralized Key Management on the WLAN so that the Jabber-enabled devices will connect.

C.

Configure the WLAN to broadcast on 5 GHz radios only and allow Jabber users to connect.

D.

Configure an AVC profile for the Jabber traffic and apply it to the WLAN.

Buy Now
Questions 8

Refer to the exhibit A network engineer is using a Cisco Catalyst 9800 Series WLC to deploy a new wireless solution in a branch location Client traffic must be configured to break out locally Which code snippet must be added to the box in the code to complete the policy profile?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Buy Now
Questions 9

An engineer is setting up a new unique NAD on a Cisco ISE.

Which two parameters must be configured? (Choose two.)

Options:

A.

device host name

B.

device password

C.

RADIUS fallback

D.

device IP address

E.

RADIUS shared secret

Buy Now
Questions 10

A wireless network uses Cisco ISE to implement 802 1x for user authentication and an Active Directory server as a user database After a power outage, the wireless clients cannot connect to the wireless network The ISE log reports a "clock skew" Which action addresses this issue?

Options:

A.

Enter the correct credentials

B.

Restart the ISE service

C.

Install a trusted certificate

D.

Configure NTP

Buy Now
Questions 11

After looking in the logs, an engineer notices that RRM keeps changing the channels for non-IEEE 802.11 interferers. After surveying the area, it has been decided that RRM should not change the channel. Which feature must be enabled to ignore non-802.11 interference?

Options:

A.

Avoid Cisco AP Load

B.

Avoid Non-802.11 Noise

C.

Avoid Persistent Non-WiFi Interference

D.

Avoid Foreign AP Interference

Buy Now
Questions 12

An engineer is implementing profiling for BYOD devices using Cisco ISE. When using a distributed model, which persona must the engineer configure with the profiling service?

Options:

A.

Device Admin Node

B.

Primary Admin Node

C.

Monitor Node

D.

Policy Services Node

Buy Now
Questions 13

What two actions must be taken by an engineer configuring wireless Identity-Based Networking for a WLAN to enable VLAN tagging? (Choose two.)

Options:

A.

enable AAA override on the WLAN

B.

create and apply the appropriate ACL to the WLAN

C.

update the RADIUS server attributes for tunnel type 64, medium type 65, and tunnel private group type 81

D.

configure RADIUS server with WLAN subnet and VLAN ID E. enable VLAN Select on the wireless LAN controller and the WLAN

Buy Now
Questions 14

An engineer must implement Cisco Identity-Based Networking Services at a remote site using ISE to dynamically assign groups of users to specific IP subnets. If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC. Which feature meets these requirements?

Options:

A.

learn client IP address

B.

FlexConnect local authentication

C.

VLAN-based central switching

D.

central DHCP processing

Buy Now
Questions 15

An engineer is planning an image upgrade of the WLC, and hundreds of APs are spread across remote sites with limited WAN bandwidth. The engineer must minimize the WAN utilization for this upgrade. Which approach must be used for the AP image upgrade?

Options:

A.

Predownload the new code to the APs.

B.

Use the Smart AP image upgrade feature.

C.

Allow the APs to download their code after WLC reboot.

D.

Execute parallel TFTP code upgrade on the APs via SSH.

Buy Now
Questions 16

A network engineer wants to implement QoS across the network that supports multiple VLANs. All the APs are connected to switch ports and are configured in local mode. Which trust model must be configured on the switch ports to which the APs are connected?

Options:

A.

CoS

B.

WMM UP

C.

DSCP

D.

IPP

Buy Now
Questions 17

A network engineer recently deployed Cisco Catalyst Center (formerly DNA Center) to a customer site. The customer is being flooded with alarms for wireless clients that fail AAA authentication. What is the path to disable the alarm in the Cisco Catalyst Center user interface?

Options:

A.

Assurance > Manage > Sensors

B.

Assurance > Manage > Intelligent Capture Settings

C.

Assurance > Manage > Issue Settings

D.

Assurance > Manage > Health Score Settings

Buy Now
Questions 18

On a Cisco Catalyst 9800 Series Wireless Controller, an engineer wants to prevent a FlexConnect AP from allowing wireless clients to connect when its Ethernet connection is nonoperational. Which command set prevents this connection?

Options:

A.

config terminal

wireless flexconnect profile [profile name]

ethernet-fallback-enable

end

B.

config terminal

wireless flexconnect profile [profile name]

fallback-radio-shut

end

C.

config terminal

wireless profile flex [profile name]

fallback-radio-shut

end

D.

config terminal

wireless profile flex [profile name]

ethernet-fallback-enable

end

Buy Now
Questions 19

An enterprise started using WebEx as a virtual meeting solution. There is a concern that the existing wireless network will not be able to support the increased amount of traffic as a result of using WebEx. An engineer needs to remark the QoS value for this application to ensure high quality in meetings. What must be implemented to accomplish this task?

Options:

A.

QoS preferred call index

B.

UP to DSCP map

C.

AVC profiles

D.

WLAN quality of service profile

Buy Now
Questions 20

An engineer completes the setup of a two-node Cisco ISE deployment for a guest portal. When testing the portal, the engineer notices that sometimes there is a certificate CN mismatch. Which certificate type helps resolve this issue?

Options:

A.

Public-Signed Root

B.

Public-Signed SAN

C.

Self-Signed Wildcard

D.

Self-Signed Standard

Buy Now
Questions 21

A network engineer needs to configure multicast in the network. The implementation will use multiple multicast groups and PIM routers. Which address provides automatic discovery of the best RP for each multicast group?

Options:

A.

224.0.0.13

B.

224.0.0.14

C.

224.0.1.39

D.

224.0.1.40

Buy Now
Questions 22

Refer to the exhibit A network engineer must deploy a configuration to a Cisco Catalyst 9800 WLC to prevent a FlexConnect AP from allowing wireless clients to connect when its Ethernet connection is down Which code snippet must be added to the box in the code to complete the configuration?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Buy Now
Questions 23

Refer to the exhibit. A network administrator must automate notifications for Security Advisories Data reports on the Cisco Catalyst Center v2.3.7 using the Report notification feature. Preferring a programmable approach over UI/CLI, the administrator decides to create a webhook via the Cisco DNA Center API to send real-time HTTP notifications to an external application. The webhook URL https://example.com/webhook uses HTTPS with a self-signed certificate, which requires a specific configuration in the payload to ensure the webhook functions correctly. Which code snippet must be placed onto the box in the code to complete the Python script that configures the webhook to use the self-signed certificate to extract the Security Advisories Data report?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Buy Now
Questions 24

Which three properties are used for client profiling of wireless clients? (Choose three.)

Options:

A.

HTTP user agent

B.

DHCP

C.

MAC OUI

D.

hostname

E.

OS version

F.

IP address

Buy Now
Questions 25

Refer to the exhibit.

What is the reason that the wireless client cannot get the RUN state?

Options:

A.

It has no communication with Cisco ISE.

B.

An authentication error has occurred.

C.

It is not getting the IP address.

D.

Because of central switching, the AP must reach the Cisco ISE directly.

Buy Now
Questions 26

An organization is supporting remote workers in different locations. In order to provide wireless network connectivity and services, OfficeExtend has been implemented. The wireless connectivity is working, but users report losing connectivity to their local network printers. Which solution must be used to address this issue?

Options:

A.

OEAP gateway override

B.

OEAP split tunnel

C.

WLAN static IP tunneling

D.

FlexConnect local switching

Buy Now
Questions 27

A wireless administrator must assess the different client types connected to Cisco Catalyst 9800 Series Wireless Controller without using any external servers. Which configuration must be added to the controller to achieve this assessment?

Options:

A.

native profile

B.

MAC classification

C.

local profile

D.

device classification

Buy Now
Questions 28

A Cisco WLC has been added to the network and Cisco ISE as a network device, but authentication is failing. Which configuration within the network device configuration should be verified?

Options:

A.

SNMP RO community

B.

device interface credentials

C.

device ID

D.

shared secret

Buy Now
Questions 29

A corporation has a wireless network in which all APs are configured in FlexConnect mode. The WLC has a data WLAN and a VoWiFi WLAN, and both SSIDs are centrally switched. Which QoS configuration must be implemented so that wireless packets maintain their markings across the wired and wireless networks?

Options:

A.

IPP

B.

CoS

C.

DSCP

D.

WMM UP

Buy Now
Questions 30

An engineer wants to upgrade the APs in a Cisco FlexConnect group. To accomplish this upgrade, the FlexConnect AP Upgrade setting will be used. One AP of each model with the lowest MAC address in the group must receive the upgrade directly from the controller. Which action accomplishes this direct upgrade?

Options:

A.

Remove the APs from the group.

B.

Reboot all APs before the upgrade.

C.

Allocate the master APs to different groups.

D.

Do not set any master APs.

Buy Now
Questions 31

A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments. Which solution must the engineer choose?

Options:

A.

Configure a second WLC to support half of the APs in the deployment.

B.

Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.

C.

Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.

D.

Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0-GHz band.

Buy Now
Exam Code: 300-120
Exam Name: Implementing Cisco Wireless Advanced Solutions (300-120 WLSI) v1.2
Last Update: Nov 17, 2026
Questions: 105
300-120 pdf

300-120 PDF

$23.75  $94.99
300-120 Engine

300-120 Testing Engine

$27.5  $109.99
300-120 PDF + Engine

300-120 PDF + Testing Engine

$36.25  $144.99