Summer Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: cramtreat

300-610 Designing Cisco Data Center Infrastructure (DCID) Questions and Answers

Questions 4

Refer to the exhibit.

A customer runs an Online Transaction Processing (OLTP) application on Server1. The application generates a small number of transactions and requires low storage latency. Server2 is a backup server that performs backups twice a day During the backup window, the OLTP application experiences high-latency spikes that affect the application performance The customer must meet these requirements

•Maintain consistent low I/O latency for the OLTP server.

•Guarantee I/O throughput for the OLTP server during backup time

•Allow the customer to keep the existing hardware.

Which action must be taken to meet these requirements?

Options:

A.

Apply a traffic shaper to the FC Switch 1 interface that is facing the server

B.

Create a SAN port channel between FC Switch! and FC Switch2.

C.

Add another 8G link to the Serverl and create F-Port-channel

D.

Configure QoS and scheduler for data traffic on both Fibre Channel switches

Buy Now
Questions 5

A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?

Options:

A.

vPC

B.

virtual interface

C.

port channel

D.

physical port

Buy Now
Questions 6

What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)

Options:

A.

Layer 3 interfaces can belong to multiple VRFs.

B.

VRF-Lite interfaces can be Layer 2.

C.

Overlapping IP addresses are permitted on different VRFs.

D.

Interfaces that belong to VRFs can be physical or logical.

E.

VRF-Lite interfaces support MPLS.

Buy Now
Questions 7

Which two configuration methods can be used to deploy QoS to Cisco MDS Series switches? (Choose two.)

Options:

A.

zone-based QoS

B.

multiple QoS policies that match individual devices

C.

VSAN-based QoS

D.

FCoE VLAN-based QoS

E.

multiple QoS policies that match multiple devices

Buy Now
Questions 8

An engineer must interconnect two data centers to support the dynamic virtual machine migration. The data centers are currently interconnected using an IPv4 network. However, the data piano encapsulation of the underlay network is expected to change next year. To meet the VM migration requirement, the solution must track MAC route changes, update all other remote devices simultaneously and prevent excessive MAC flapping with broadcast and unicast traffic loops. The company must also use networking equipment from different manufacturers to prevent vendor-locking. Which solution meets these requirements?

Options:

A.

EoMPLS

B.

EVPN

C.

OTV

D.

VXLAN

Buy Now
Questions 9

An engineer is building a data center network with VXLAN EVPN. The requirement is to use multicast for the broadcast, unknown unicast, and multicast replication.

Which two VNI to multicast group mapping methods must be used to meet these requirements? (Choose two.)

Options:

A.

many NVE to one multicast group

B.

one VNI to one multicast group

C.

many VNI to one multicast group

D.

one NVE to many multicast groups

E.

many VNI to many multicast groups

Buy Now
Questions 10

An engineer must connect a storage array directly to an existing Cisco UCS Fabric Interconnect. The customer requires a solution that provides IP-based storage that does not need to be connected through an external switch Also, the operations team wants to have the ability to have direct access to the files stored on the storage array from their Linux hosts. Which storage technology meets these requirements?

Options:

A.

NAS

B.

SCSI

C.

FCoE

D.

SAN

Buy Now
Questions 11

The network infrastructure team is beginning to automate routine tasks within the Cisco ACI fabric and is searching for the appropriate solution The solution must not require any additional software installed on the Cisco APIC Networking team members lack automation experience and prefer to use a tool that does not require in-depth programming knowledge Finally configuration within the Cisco ACI fabric is rarely modified or removed Which solution must the team choose?

Options:

A.

Cobra SDK

B.

Ansible

C.

Terraform

D.

Puppet

Buy Now
Questions 12

Which two automation requirements can be met by using Puppet? (Choose two.)

Options:

A.

Push configuration updates immediately to servers.

B.

Enable clients to pull changes to configuration files.

C.

Enable clients to pull changes without installing an agent.

D.

Provide support for writing new modules in Python.

E.

Enable one-off infrastructure changes to be performed manually.

Buy Now
Questions 13

A network engineer is implementing Cisco UCS manager with Cisco UCS center integration. The company is strict security policies require that the logical profile of virtual network adapters and logical addressing assigned to Cisco UCS servers be managed by the Cisco UCS manager. The users must also be prevented from being able to acknowledge pending activities in the Cisco UCS manager. Which two profile must be used to meet these requirements? (Choose two.)

Options:

A.

Global maintenance

B.

Public network control

C.

Restricted chassis

D.

Local power

E.

Local service

Buy Now
Questions 14

An engineer is implementing a Cisco UCS environment. The system must aggregate all vNICs into a single policy and consistently enforce node disassociation across the cluster. Which two UCS policies meet these requirements? (Choose two.)

Options:

A.

scrub policy

B.

vNIC policy

C.

boot policy

D.

firmware policy

E.

LAN connectivity policy

Buy Now
Questions 15

When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?

Options:

A.

BGP ECMP

B.

Layer 4 to Layer 7 device package

C.

inline load-balancing device

D.

ITD

Buy Now
Questions 16

An engineer must design a Cisco UCS environment for a customer The design requires the most efficient use of available bandwidth with active-active uplinks The upstream Cisco Nexus 9000 Series Switch must automatically initiate the port-channel connectivity to the fabric interconnects Which configuration must the engineer choose to meet these requirements?

Options:

A.

• fabric interconnects in Ethernet switching mode

• LACP port-channel from fabric interconnects and Cisco Nexus 9000 switches

B.

• fabric interconnects in Ethernet switching mode

• static port-channel from fabric interconnects and Cisco Nexus 9000 switches

C.

• fabric interconnects in Ethernet end-host mode

• LACP port-channel from fabric interconnects and Cisco Nexus 9000 switches

D.

• fabric interconnects in Ethernet end-host mode

• static port-channel from fabric interconnects and Cisco Nexus 9000 switches

Buy Now
Questions 17

An engineer manages hundreds of Cisco Nexus Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive support, and is object-oriented. Which automation tool should be used to meet these requirements?

Options:

A.

Phython

B.

Bash

C.

YAML

D.

Perl

Buy Now
Questions 18

A customer connects a high-speed Fibre Channel storage array to a Cisco MDS 9000 Series Switch using an 8 Gbps interface.

Which action guarantees line rate traffic processing on the interface?

Options:

A.

Set global buffering with B2B_credits for the interface.

B.

Set local buffering with B2B_credits for the interface.

C.

Configure the interface rate mode as dedicated.

D.

Configure the interface rate mode as shared.

Buy Now
Questions 19

A SAN fabric is built between a pair of Cisco MDS 9000 Series Switches. The requirement is for the ISL to use the VSAN ID to toward traffic from multiple VSANs across the same physical link. Additionally, the Fibre Channel trace feature must be supported. Which ISL interface parameters are required to meet these requirements?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Buy Now
Questions 20

An engineer deploys VMware ESXi hypervisor on blade servers. The virtual networking is managed by Cisco Nexus 1000V Series Switches.

Which configuration aligns with Cisco recommended practices for providing high availability and a maximum throughput to the VMware ESXi hosts?

Options:

A.

dual vNICs with static EtherChannel link aggregation

B.

dual vNICs with hardware fabric failover on the fabric interconnects

C.

dual vNICs with MAC pinning link aggregation

D.

dual vNICs with LACP link aggregation

Buy Now
Questions 21

An engineer must design a secondary site to prevent a catastrophic primary site failure. The applications must communicate across sites via the data link layer of the OSI model. The Layer 3 transport that is available for this solution consists of 10-Gb connections over Layer 3.

Which two solutions meet these requirements? (Choose two.)

Options:

A.

OTV

B.

vPC

C.

OSPF

D.

ISIS

E.

VXLANEVPN

Buy Now
Questions 22

A network consultant proposes that the configuration of the Cisco UCS servers be based on service templates to facilitate the UCS infrastructure operation. The service profiles must remain connected to the template and be modified when the template settings are changed.

Which configuration meets these requirements?

Options:

A.

service profile with type set to Global

B.

service profile with type set to Local

C.

service profile template with type set to Updating

D.

service profile template with type set to Initial

Buy Now
Questions 23

An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?

Options:

A.

IP redirects

B.

flow control

C.

proxy ARP

D.

HSRP

Buy Now
Questions 24

Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.

Options:

Buy Now
Questions 25

Which pools are used when a vNIC template is created in Cisco UCS Manager?

Options:

A.

WWPN

B.

UUID

C.

MAC

D.

IP

Buy Now
Questions 26

A customer deploys 32 virtualization hosts in a Cisco UCS domain. All hosts run in the same cluster and have Identical hardware specifications. The operating system requires that all firmware is consistent across the hosts (or driver support. The customer must provision additional interfaces later for expandability. Which feature of Cisco UCS Manager meets these requirements?

Options:

A.

Initial Service Profile Template

B.

Initial vNIC Template

C.

Updating Service Profile Template

D.

Updating vNIC Template

Buy Now
Questions 27

An engineer must develop a Python tool to automate software upgrades of both data center and non-data center devices. All devices offer a RESTful API and require a JSON or XML payload Vendor-specific libraries must be avoided. Which library must the engineer choose?

Options:

A.

requests

B.

Nornir

C.

ncciient

D.

Netmiko

Buy Now
Questions 28

A customer needs a design for a new data center network that meets these requirements:

    Logically partition the environment into separate security domains.

    Cut costs related to purchasing additional equipment.

    Separate routing processes, TCAM, QoS tables, and data planes.

Which technology must be used?

Options:

A.

VLAN

B.

vPC

C.

VDC

D.

VRF

Buy Now
Questions 29

Refer to the exhibit.

An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)

Options:

A.

SAN Pin Groups on the Cisco UCS Fabric Interconnects.

B.

NPV feature on the Cisco MDS Series.

C.

end-host mode feature on the Cisco UCS Fabric Interconnects

D.

NPIV feature on the Cisco MDS Series

E.

Smart Zoning feature on the Cisco UCS Fabric Interconnects

Buy Now
Questions 30

What is a design consideration when implementing FSPF?

Options:

A.

Routes are based on the domain ID.

B.

Routes are based on the distance vector protocol.

C.

FSPF runs only on F Ports.

D.

FSPF runs on a per-chassis basis.

Buy Now
Questions 31

An engineer must configure a new maintenance policy that will apply to multiple Cisco UCS domains The policy must be available for use by service profiles and service profile templates created and managed n either Cisco UCS Manager or Cisco UCS Central Changes to this policy must be allowed only in Cisco UCS Central Which policy type must the engineer select to accomplish these goals?

Options:

A.

hybrid policy

B.

local policy

C.

central policy

D.

global policy

Buy Now
Questions 32

A cloud service provider provisioned four active/active data centers in various locations within the country at 50 miles between each data center. The data centers must provide redundant network infrastructure and always be available to customers.

Which two data center design steps must be used to meet these requirements? (Choose two.)

Options:

A.

Provide application hosting services to customers from the closest data center.

B.

Implement active cluster in data centers 1 and 2 and backup in 3 and 4.

C.

Use asynchronous replication between data centers 1 and 2.

D.

Deploy database services in data center 1 and application layer to other data centers.

E.

Configure application data replication to all backup data centers.

Buy Now
Questions 33

An engineer is implementing management access to a Cisco Nexus platform. The customer requires a solution that provides isolation between the data and control planes. In addition to management that uses encryption and authentication. The customer will manage the device using both IPv4 and IPv6. Which two components should be used to meet these requirements (Choose two.)

Options:

A.

SVI interface

B.

SSM protocol

C.

SNMP

D.

Telnet protocol

E.

mgmt0 interface

Buy Now
Questions 34

Refer to the exhibit. A Cisco engineer is configuring a FlexPod data center for SAP with Cisco ACI, Cisco UCS Manager 4.0. and Net AppAFFA-Series. All systems and fabric links feature redundancy and provide end-to-end high availability. After the engineer sets the needed VLANs on the NetApp controller ports and adds them to the data broadcast domain, the engineer must make the storage disks visible for the UCS hosts Which action must be taken on the UCS to accomplish this task?

Options:

A.

Configure ION pools for ISCSI boot.

B.

Create aggregates in ONTAP.

C.

Provide a storage virtual machine.

D.

Enable HTTPS access on the servers.

Buy Now
Questions 35

An engineer must choose the World Wide Port Name for the Cisco UCS Fibre Channel virtual host bus adapter.

Which identifier must be used?

Options:

A.

naa.600a09840691712159764d

B.

fe80::314e:4566:8702:bf3d

C.

iqn.2021-08.com.acme:3xxx

D.

20:00:00:25:B5:97:c3:ac

Buy Now
Questions 36

What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?

Options:

A.

reduction in application performance

B.

distance limitations

C.

specific backup requirements

D.

potential data loss

Buy Now
Questions 37

A network administrator must create a redundant vHBA for the mission-critical virtual machines (VMs) installed on a Cisco UCS Fabric Interconnect blade server. The VMs access multiple datastores using VSAN55 and VSAN95. The datastore on which the VMs are hosted must be accessible if any of the uplinks goes offline. Which action meets these requirements?

Options:

A.

Attach VSAN55 to vHBA1 and VSAN95 to vHBA2.

B.

Assign VSAN55 and VSAN95 to vHBA1 and vHBA2.

C.

Enable failover for the vHBA with VSAN55 and VSAN95 enabled.

D.

Configure load-balancing for vHBAs with VSAN55 and VSAN95 attached.

Buy Now
Questions 38

A network engineer needs to configure a high availability feature for a data center that uses a Cisco Nexus 7700 Series Switch that is configured with dual supervisors. The feature must meet these requirements:

• Network resilience must be ensured.

• Network instability for Layer 3 external routing protocols must be reduced.

• Neighbors must be notified when the control plane is restarting.

• Traffic must still be forwarded to peers while neighbor relationships arc restarting.

What should be used to meet these requirements?

Options:

A.

graceful restart

B.

NSF

C.

NSR

D.

BFD

Buy Now
Questions 39

A company runs mission -critical infrastructure in a single data center. Due to business growth It plans to open more data center in the coming years. A network engineer is asked to recommend a network technology for data center interconnection that allows scalability and seamless VM mobility while providing maximum security and fault isolation between data center. Which technology must be used to meet these requirements?

Options:

A.

Cloudsec

B.

UDLD

C.

Trustsec

D.

OTV

Buy Now
Questions 40

A network engineer must design a data center network with four Cisco Nexus 7706 switches. The switches will be installed in primary and secondary data centers in vPC domains. The two data centers must be connected via Layer 2 links and provide the maximum throughput, redundancy, and avoid port-blocking spanning-tree design.

Which deployment model meets these requirements?

Options:

A.

dual-sided single vPC

B.

single-sided dual vPC

C.

dual-sided dual vPC

D.

single-sided single vPC

Buy Now
Questions 41

A network consultant must design a high availability interconnection of a clustered Cisco UCS Fabric Interconnect toward two upstream Layer 2 switches. The Ethernet interconnection must use all redundant links and have no impact on the STP domain size.

Which connectivity solution must be used?

Options:

A.

Cisco UCS Fabric Interconnect in switch mode with dual uplinks distributed evenly to the upstream switches

B.

Cisco UCS Fabric Interconnect in switch mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size

C.

Cisco UCS Fabric Interconnect in end host mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size

D.

Cisco UCS Fabric Interconnect in end host mode with dual uplinks distributed evenly to the upstream switches

Buy Now
Questions 42

An engineer deploys a Cisco UCS environment with the storage array directly attached to the Fabric Interconnects. The operations team mandates that the solution must not require the configuration of Fibre Channel zoning. Which configuration set meets these requirements?

Options:

A.

Storage lacing port type: Uplink port

Fabric interconnect FC mode: End-host

B.

Storage facing port type: Storage port

Fabric interconnect FC mode: Switching

C.

Storage facing port type: FCoE storage port

Fabric interconnect FC mode: End-host

D.

Storage facing port type: Appliance port

Fabric interconnect FC mode: Switching

Buy Now
Questions 43

An engineer must design the compute portion of a data center environment. The environment includes:

* direct-attach Fibre Channel storage array with four 32 G Fibre Channel ports per controller

* Cisco UCS B-series servers equipped with Cisco UCS IOM 2408 Fabric Extenders

* Cisco 6454 Fabric Interconnects

The fabric interconnects conned to the LAN via 100G ports, the SAN via 32 G Fibre Channel ports, and the IOM 2408 via 10 G ports. Which storage connectivity strategy must the engineer choose?

Options:

A.

UCS' two-port PortChannel from each IOM10 each fabric interconnect.

• Storage: Qty four Fibre Channel links from each SAN controller Id each fabric interconnect.

B.

• UCS: four-poll Port Channel from each IOM to each fabric interconnect

• Storage; tour-port SAN-PortChannel from each SAN controller to each fabric interconnect

C.

• UCS: Qty (our 802.1q trunks from each IOM to each fabric interconnect

• Storage: Qfy two Fibre Channel links from each SAN controller to each fabric Interconnect

D.

• UCS; four-port back-to-baok PortChannel between IOM and fabric interconnect

• Storage; two-port SAN-PortChannel from each SAN controller to each fabric interconnect

Buy Now
Questions 44

An engineer is operating data center environment that hosts data-intensive financial applications. The applications are mostly processing HTTP/HTTPS data with large data segments, which results in a CPU contention due to the significant network processing.

Which set of the Ethernet adapter policies must be selected to resolve the issue?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Buy Now
Questions 45

Refer to the exhibit In this scenario a Cisco engineer is building a loop-free topology where a dedicated layer of the vPC domain adjacent to the aggregation layer which also runs vPC Is used to interconnect the two data centers together. The engineer globally configures a vPC domain identifier on both vPC devices where the domain ID is the same on both peer devices. Which action successfully forms the domain?

Options:

A.

Configure vPC-peer-keepalive link on both peer devices

B.

Put peer device interfaces into a suspended state.

C.

Enable and reuse an ISL Layer 3 trunk port channel

D.

Synchronize the MAC addresses for the member ports

Buy Now
Questions 46

Refer to the exhibit. FCoE is used in the topology between the SAN Storage devices and SAN-Core routers. After noticing traffic drops to hosts accessing SAN-B storage, the engineering team wants to reduce the oversubscription ratio in the topology. Which action must the team take?

Options:

A.

Increase the bandwidth between SAN-A and SAN-B Storage toward the SAN-Core devices.

B.

Configure QoS to prioritize SAN-A traffic

C.

Configure QoS to prioritize SAN-B traffic.

D.

Increase the bandwidth between the SAN-Coro and SAN-Edgo devices.

Buy Now
Questions 47

Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)

Options:

A.

HA

B.

VSS

C.

FT

D.

VDP

E.

DRS

Buy Now
Questions 48

An engineer must implement an iSCSI storage connectivity in the existing Cisco UCS environment. The environment is based on Cisco UCS С-Series rack server, Cisco Nexus 1000V Series Switches, and VMware ESXi hosts. The implementation must meet these requirements:

    Provide multipathing and high availability in the event of a critical path failure.

    Be cost-effective and not require the purchase of new equipment.

Which two components must be selected to meet these requirements? (Choose two.)

Options:

A.

software iSCSI adapter

B.

storage binding

C.

uplink pinning

D.

system VLAN

E.

hardware iSCSI NIC

Buy Now
Questions 49

A network engineer must design a Cisco HyperFlex solution based on these requirements:

• two clusters in the main data center consisting of five HyperFlex nodes

• one edge node for the remote branch

• cluster nodes that use one rack unit of space

Which two devices should be used in the remote branch cluster for this design? (Choose two.)

Options:

A.

Gigabit Ethernet Switch

B.

HX240C

C.

HX220C

D.

Fabric Interconnect 6300

E.

UCSB B200

Buy Now
Questions 50

Refer to the exhibit.

A system administrator needs a solution to manage random packet drops between two Cisco UCS C240 M4 servers The servers are connected to a pair of Cisco Nexus 7009 switches using 10G fibre interfaces Both servers are generating too many east-west traffic flows from TCP-based applications which causes significant latency that impacts the customer Also the transfer of files from Server-1 to Server-2 larger than 10 GB results in multiple retransmits Which design solution resolves this issue?

Options:

A.

Add a second uplink to each server NIC

B.

Increase the amount of memory m both servers

C.

Apply rate-limit on the server 1 VLAN interface per application flow.

D.

Connect both servers m the same VLAN

Buy Now
Questions 51

Which address pool is used when a vHBA template is created?

Options:

A.

MAC

B.

WWPN

C.

IP

D.

UUID

Buy Now
Questions 52

A storage engineer requires a solution that achieves multiple paths between a server and storage array. The design must support complete traffic isolation and support a 50% growth in the next year. Which FCoE solution meets these requirements?

Options:

A.

single switch with multiple links

B.

at least two VSANs across the fabric

C.

at least two FC zone sets with multiple zones

D.

single VSAN across the fabric

Buy Now
Questions 53

An engineer must interconnect two geographically separated data centers. The service provide offers a Layer 2 metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?

Options:

A.

IPsec

B.

MACsec

C.

L2TPv2

D.

L2TPv3

Buy Now
Questions 54

An engineer must design a multitenant solution using Cisco 7709 switches. The solution must support separate routing instances, separate spanning tree domains, and separate firewalls for each tenant. Which solution meets these requirements?

Options:

A.

CFS

B.

VDC

C.

vPC

D.

VRF

Buy Now
Questions 55

Refer to the exhibit.

A customer must ensure that the interface on a switch has enough resources to sustain the line rate traffic during peak load.

Which action meets this requirement?

Options:

A.

Change the rate mode to dedicated.

B.

Set Transmit B2B credit to 16.

C.

Change the port mode to NL.

D.

Increase the data field size to 9000 bytes.

Buy Now
Questions 56

Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?

Options:

A.

VSS that has unified uplinks

B.

Ethernet and unified ports on the same port channel

C.

vPC that has unified uplinks

D.

cross-connections with pinning

Buy Now
Questions 57

Refer to the exhibit.

An engineer is configuring a QoS policy with these requirements

    Match-all AF11 traffic and set it to a DSCP value of 14.

    The committed rate must be 10 Mbps with a committed burst rate of 1000 ms

    Drop any AF11 traffic that violates these settings.

    Any traffic other than af11 must have a DSCP value of 0

The given class-map configuration already exists. Which solution must the engineer use to meet the requirements?

A)

B)

C)

D)

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Buy Now
Questions 58

An enterprise is experiencing transmission errors and excessive deploys over their WAN when backing up user workstations. A systems architect decided to resolve the problems by centralizing data storage and processing to within the confines of the data center. Which technology is most suitable to mitigate the issues?

Options:

A.

VDI

B.

QoS

C.

VDC

D.

RAS

Buy Now
Questions 59

A client in a commercial building Installs a Cisco blade server in the multitenant Cisco UCS blade Infrastructure. To cut operating costs me client’s data center is shared with other organizations. The client asks an engineer prevent third parties from accessing their equipment and from accessing BlOS-related information when booting a server. Which Two policies must be used to meet these requirements? (Choose two.)

Options:

A.

quiet boot

B.

post error pause

C.

ASPM support

D.

CDN control

E.

front panel lockout

Buy Now
Questions 60

An engineer must connect a Cisco UCS B-Series based system to an existing large storage area network fabric. The deployment must support hardware-based load balancing, prevent Fibre Channel domain ID exhaustion, and enable all blade servers to be in the same VSAN. Which set of actions meets the requirements?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Buy Now
Questions 61

Which type of Cisco Intersight workflow input controls the availability of other specific workflow inputs during the execution of a workflow?

Options:

A.

Progressive Disclosure rule

B.

Parameter Set rule

C.

conditional operation

D.

String Object Selector

Buy Now
Questions 62

A customer is evaluating a new disaster-recovery solution for their SAN, which is used for noncritical CRM purposes. The SAN is frequently backed up locally at the customer's existing single location, and several hours of data loss can be sustained. The customer wants to retain complete control of the failover process to a separate physical location. Which type of DR is most suitable for the customer?

Options:

A.

cold standby

B.

warm standby

C.

active/passive

D.

active/active

Buy Now
Questions 63

A engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure. Which tool meets these requirements?

Options:

A.

Cisco intersight

B.

Cisco UCS director

C.

Cisco data center network manager

D.

Cisco tetration

Buy Now
Questions 64

An engineer must use OTV for layer 2 connectivity between data centers to support virtual machine between the customer sites. To support this requirement, the engineer must ensure the existence of the same default gateway on both sites. Additionally, the operations team report high bandwidth utilization on site A and wants to optimize the outbound traffic flows to use a DC exit point. Which feature must be used to meet these requirement?

Options:

A.

FHRP filter

B.

Control group

C.

Data group

D.

ARP filter

Buy Now
Questions 65

Which two configurations allow for routing traffic between two VDCs? (Choose two.)

Options:

A.

Connect the VDCs to an external Layer 3 device.

B.

Cross-connect the ports between the VDCs.

C.

Create VRF-aware software infrastructure interfaces.

D.

Create a policy map in the default VDC that routes traffic between the VDCs.

E.

Create interfaces in the VDC that can be accessed by another VDC.

Buy Now
Questions 66

A network engineer designs a Cisco Nexus data center network for a client-server farm using a pair of Nexus 9000 Series. Switches In a vPC setup. Each server connects with two interfaces to both Nexus switches. The Nexus switches must always initiate the negotiation with the server. Which feature should be used in this design to ensure traffic is forwarded from the server to the data center network?

Options:

A.

LACP mode auto

B.

LACP mode active

C.

PAgP mode desirable

D.

PAgp mode auto

Buy Now
Questions 67

Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.

Options:

A.

VPC+

B.

UDLD

C.

EVPN

D.

OSPF

Buy Now
Questions 68

The user traffic destined to all web servers located in the data center must pass first through a set of firewalls for deep packet inspection. A network architect must design the Cisco Intelligent Traffic Director (ITD) deployment that meets these requirements:

    The firewalls are connected to a set of two Cisco Nexus switches to provide stateful handling of traffic.

    The ITD service is provided for inside and outside segments of the firewall.

Which ITD deployment mode must be implemented to meet these requirements?

Options:

A.

server load-balancing deployment mode

B.

server vPC deployment mode

C.

one-arm deployment mode

D.

sandwich deployment mode

Buy Now
Questions 69

Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.

Options:

Buy Now
Questions 70

A customer must deploy a new Cisco HyperFlex stretched cluster solution to ensure virtual server availability in case the data center fails. The current network environment provides multiple geographic locations. Which action must be taken to meet these objectives?

Options:

A.

Implement the round trip time latency between the sites to be lower than 20 ms

B.

Place an independent witness component at a third site

C.

Deploy the stretch duster sites to be within the distance of 300 miles apart

D.

Configure the cluster with the maximum data replication factor

Buy Now
Questions 71

Refer to the exhibit. A Cisco engineer is configuring a customer scenario with 2 x MDS 9000 switches 24 x UCS B200M6 blade servers. UCS 64S4 Fabric Interconnect in end-host mode and 3 x UCS 5108 server chassis with 2408 Fabric Extenders The engineer installs 6 x SQL Server 2019 on all blades and then notices that there are read and write latencies What is the best way to balance the utilization across the shared ports?

Options:

A.

Enable "Only dedicate rate mode

B.

Change the assigned speed to 8 Gbps Auto.

C.

Set 4 Gbps performance buffers

D.

Disable restrictions on oversubscription ratios

Buy Now
Questions 72

A customer wants to deploy a Layer 2 extension over a transport infrastructure for multiple data centers. The data center technology should support a localized Layer 3 gateway, a separate flooding domain, and STP isolation per data center. Which DCI technology meets these requirements?

Options:

A.

Pseudowire

B.

VXLAN EVPN

C.

E-Line

D.

E-LAN

Buy Now
Questions 73

A customer requires a tool to manage Cisco network hardware. The solution must use secure communication using a secure network protocol, support the use of declarative language to manage the state of resources, and periodically pull changes to the controlled nodes. Which tool meets these requirements?

Options:

A.

Ansible

B.

SaltStack

C.

Puppet

D.

Nomir

Buy Now
Questions 74

An engineer is implementing a Cisco UCS environment The requirements for the solution are for the MAC addresses to be learned only on the server-facing ports. The use of the Spanning Tree Protocol must be avoided. Also, the engineer must have deterministic traffic handling from blades to uplink ports.

Which two settings must be selected to meet these requirements? (Choose two.)

Options:

A.

end-host mode

B.

dynamic pinning

C.

NPIV mode

D.

static pinning

E.

switching mode

Buy Now
Questions 75

Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?

Options:

A.

NPIV mode

B.

FC end-host mode

C.

NPV mode

D.

FC switching mode

Buy Now
Questions 76

Refer to the exhibit.

The Cisco Nexus Series Switch with hostname Nexus! is the default gateway for server A and server B Both servers must have reachability to the internet; however, server A internet traffic must pass through the firewall for deep packet inspection. Also, the firewall must inspect any communication between server A and server B. Which solution must be applied to separate the data plane path for server A and server B?

Options:

A.

VLAN

B.

VRF

C.

VDC

D.

VXLAN

Buy Now
Questions 77

Drag and drop the technologies from the left onto the correct descriptions on the right.

Options:

Buy Now
Exam Code: 300-610
Exam Name: Designing Cisco Data Center Infrastructure (DCID)
Last Update: Jun 15, 2025
Questions: 258
300-610 pdf

300-610 PDF

$33.25  $94.99
300-610 Engine

300-610 Testing Engine

$38.5  $109.99
300-610 PDF + Engine

300-610 PDF + Testing Engine

$50.75  $144.99