DES-1721 Specialist - Implementation Engineer-SC Series Exam Questions and Answers

There has been a request to add iSCSI functionality to a SC9000 array for replication. SC is currently using slots 4 and 5 for SAS back end. Slots 2 and 3 for Fibre Channel front end.

How many slots are available for new half-height I/O Cards?

A customer has two production sites with one storage administrator at each site. The customer wants to replicate data between their SC9000 storage arrays. Each administrator uses a workstation with the Dell Storage Manager Client to manage their respective system. Now, the CEO wants data replicated between both sites.

What is the first step to configure replication between sites?

A customer has a space of 20U available on the rack that already houses a SCv3020 array. How many expansion SCv360 enclosures can be installed in the available space?

When planning the necessary Bandwidth for Remote Instant Replay what needs to be considered?

During the initial installation of a new SC9000 Storage Center, which Dell Storage Manager (DSM) Client option should be selected?

Which best practices should be followed when using iSCSI to connect SC Series arrays and hosts?

What is the maximum number of Fault Domains on a SCv3000 Storage Center using SAS front-end?

Refer to the exhibits.

Which is the correct front end and cabling for an SC7020 with 2 port FC connectivity?

A)

B)

C)

D)

You are on-site to install 2 new Brocade switches with a Storage Center. By default, every new Brocade switch IP address is set to 10.77.77.77. What is the command to check the IP address of a Brocade switch?

Which option will enable compression on an SC Series array volume?

Based on documented best practices, which options may need to be modified on a server QLogic HBA?

You are installing an SC8000 array and the customer notices that each of the controllers only have 16 GB of memory. The customer wants to maximize this memory. What is the maximum RAM supported on a single SC8000 controller?

When installing an SC Series array, the customer indicated that they want the controller configured to provide the maximum amount of storage space. You discover that the storage controller was shipped with twelve 900 GB drives and twelve 1.8 TB drives of the same type.

Which redundancy level can be selected to provide the maximum amount of storage?

Which SC Series array feature allows all front-end ports to act as active data paths?

What is the maximum number of drives per chain supported by an SC9000 storage array?

You have just deployed an SC Series array in Virtual Port Mode. What is the correct sequence of steps to perform an array port failover test?

Refer to the exhibit.

Starting in the upper left corner of the SCv3000 what is the numerical order of the disks across the top row? A. 3, 2, 1, 0

B. 4, 3, 2, 1

C. 1, 2, 3, 4

D. 0, 1, 2, 3

What is a licensed feature of Dell Storage Manager?

In an SC Series environment, which Fibre Channel zoning method is more flexible?