Huawei H12-821_V1.0 Dumps Questions Answers

Comprehensive and Detailed Step-by-Step Explanation:

1. IPv6 and Neighbor Discovery Protocol (NDP):

In IPv4, a host uses ARP (Address Resolution Protocol) to map an IP address to a MAC address for communication.

In IPv6, ARP is not used . Instead, IPv6 uses the Neighbor Discovery Protocol (NDP) for address resolution.

2. Why the Statement is FALSE:

IPv6 does not use ARP for resolving link-layer addresses.

IPv6 uses NDP, which operates through ICMPv6 messages to perform the equivalent function.

3. Summary:

The statement is FALSE because IPv6 uses NDP, not ARP, to obtain the link-layer address of the destination host.

This statement is false because IGMPv2 improves upon IGMPv1 by introducing the Leave Group message .

In IGMPv1 , members leave silently, and the router waits for the timeout.

In IGMPv2 , a host sends a Leave Group message, prompting the router to send a Group-Specific Query to determine if other members are still present. If no responses are received, the group is pruned before timeout.

Reference from Huawei HCIP-Datacom-Core Technology Study Guide:

“IGMPv2 allows group members to actively send Leave messages, reducing unnecessary forwarding delays. This improves efficiency over IGMPv1.”

(Chapter: Multicast Protocols – Section: IGMP Versions)

In an OSPF broadcast or NBMA network with at least two routers, one router must act as the DR (Designated Router), and another as the BDR (Backup Designated Router) to ensure efficient communication and reduce the number of adjacencies. This is a requirement for OSPF operation in such network types ​.