170-010 Brocade Certified vRouter Engineer Questions and Answers

Which command line will configure the OSPF router ID?

Which term is a definition of a VLAN?

vyatta@VYA1:~$ show ip ospf neighbor

OSPF process 0:

Neighbor ID Pri State Dead Time Address Interface

192.168.131.2 1 Full/Backup 00:00:38 192.168.12.2 eth2

192.168.163.3 1 Init/DROther 00:00:33 192.168.13.3 eth3

vyatta@VYA1:~$

10.1.16

vyatta@VYA1:~$ show ip ospf database

OSPF Router with ID (172.24.42.51) (Process ID 0)

Router Link States (Area 0.0.0.0)

Link ID ADV Router Age Seq# CkSum Link count

172.24.42.51 172.24.42.51 167 0x80000008 0xa98e 3

172.24.42.52 172.24.42.52 166 0x80000006 0x21e7 3

172.24.42.53 172.24.42.53 6 0x8000000b 0x7854 3

172.24.42.54 172.24.42.54 7 0x80000003 0x1183 4

Net Link States (Area 0.0.0.0)

Link ID ADV Router Age Seq# CkSum

192.168.12.1 172.24.42.51 327 0x80000002 0x92e8

192.168.13.3 172.24.42.53 32 0x80000002 0x6d08

192.168.23.3 172.24.42.53 602 0x80000002 0x0d5d

192.168.160.3 172.24.42.53 10 0x80000003 0x3e9f

AS External Link States

Link ID ADV Router Age Seq# CkSum Route Tag

0.0.0.0 172.24.42.51 187 0x80000003 0x04a1 E2 0.0.0.0/0 254

vvyatta@VYA1:~$

Which statement describes the status shown in the output?

Your eth1 interface is connected to an ISP, but your user traffic is still not reaching the Internet. You suspect a problem with the DHCP lease.

vyatta@vyatta:~$ show dhcp client leases

interface : eth1

ip address : 192.168.128.11 [Active]

subnet mask : 255.255.255.0

router : 182.168.128.2

name server : 192.168.128.2

dhcp server : 192.168.128.2

lease time : 86400

last update : Wed Jun 19 00:06:00 GMT 2013

expiry : Thu Jun 20 00:06:00 GMT 2013

reason : BOUND

vyatta@vyatta:~$

Which line in the output shows the problem?

If all interfaces are active, which route would be preferred?

Which command displays the headers of packets matching firewall rules?

Data is being transmitted from host A to host B.

If you were to capture a frame at the point indicated in the exhibit, what would the source MAC address be?

Some of your internal users are complaining that they can't get to the mail server at 10.6.7.22.

Looking at the firewall rulebase in the exhibit, what is the problem?

Which two elements must be configured on your Brocade Vyatta vRouter to use the upgrade system image command? (Choose two.)