ISTQB Certified Tester Foundation Level - Automotive Software Tester
Last Update May 14, 2024
Total Questions : 40
If you want to pass the iSQI CTFL-AuT exam on the first attempt, you need an updated study guide for the syllabus and concise and comprehensive study material which is available at Cramtick. Cramtick has all the authentic study material for the iSQI CTFL-AuT exam syllabus. You must go through all this information and study guide while doing the preparation and before appearing for the CTFL-AuT exam. Our IT professionals have planned and designed the iSQI ISTQB Certified Tester Foundation Level - Automotive Software Tester certification exam preparation guide in such a way to give the exam overview, practice questions, practice test, prerequisites, and information about exam topics facilitating you to go through the iSQI ISTQB Certified Tester Foundation Level - Automotive Software Tester exam. We endorse you to use the preparation material mentioned in this study guide to cover the entire iSQI CTFL-AuT syllabus. Cramtick offers 2 formats of iSQI CTFL-AuT exam preparation material. Every format that is available at Cramtick aids its customers with new practice questions in PDF format that is printable as hard copies of the syllabus. Cramtick also offers a software testing engine that is GUI based can run on Windows PC and MAC machines. Our testing engine is interactive helping you to keep your test record in your profile so that you can practice more and more until fully ready for the exam.
| Exam Name | ISTQB Certified Tester Foundation Level - Automotive Software Tester |
| Exam Code | CTFL-AuT |
| Actual Exam Duration | 60 minutes |
| Expected no. of Questions in Actual Exam | 40 |
| Official Information | https://www.istqb.org/certifications/automotive-software-tester |
| See Expected Questions | iSQI CTFL-AuT Expected Questions in Actual Exam |
| Take Self-Assessment | Use iSQI CTFL-AuT Practice Test to Assess your preparation - Save Time and Reduce Chances of Failure |
| Section | Weight | Objectives |
|---|---|---|
| 1 Introduction (K2) [30 Min] | 1.1 Requirements from divergent project objectives and increasing product complexity (K2) [15 Min] 1.2 Project aspects influenced by standards (K1) [5 Min] 1.3 The six generic phases in the system lifecycle (K1) [5 Min] 1.4 The contribution/participation of the tester in the release process (K1) [5 Min] |
|
| 2 Standards for the testing of E/E systems (K3) [300 Min] | 2.1 Automotive SPICE (ASPICE) (K3) [140 Min] 2.1.1 Design and structure of the standard (K2) [25 Min] 2.1.1.1 The two dimensions of ASPICE 2.1.1.2 Process categories in the process dimension 2.1.1.3 Capability levels in the capability dimension 2.1.2 Requirements of the standard (K3) [115 Min] 2.1.2.1 Test specific processes 2.1.2.2 Assessment levels and capability indicators 2.1.2.3 Test strategy and regression test strategy 2.1.2.4 Test documentation in ASPICE 2.1.2.5 Verification strategy and criteria for unit verification (SWE.4) 2.1.2.6 Traceability in Automotive SPICE (ASPICE) 2.2 ISO 26262 (K3) [125 Min] 2.2.1 Functional safety and safety culture (K2) [20 Min 2.2.1.1 Objective of functional safety for E/E systems 2.2.1.2 Contribution of the tester to the safety culture 2.2.2 Integration of the tester in the safety lifecyle (K2) [15 min] 2.2.3 Structure and test specific parts of the standard (K1) [10 Min] 2.2.3.1 Design and structure of the standard [informative] 2.2.3.2 Relevant volumes (parts) for the tester 2.2.4 The influence of criticality on the extent of the test (K2) [20 Min] 2.2.4.1 The criticality levels of ASIL 2.2.4.2 Influence of ASIL on test techniques, test types and the extent of the test 2.2.5 Application of content from CTFL® in the context of ISO 26262 (K3) [60 Min] 2.3 AUTOSAR (K1) [15 Min] 2.3.1 Objectives of AUTOSAR (K1) [5 Min] 2.3.2 General structure of AUTOSAR (K1) [informative] [5 Min] 2.3.3 Influence of AUTOSAR on the work of the tester (K1) [5 Min] 2.4 Comparison (K2) [20 Min] 2.4.1 Objectives of ASPICE and ISO 26262 (K1) [5 Min] 2.4.2 Comparison of the test levels (K2) [15 Min] |
|
| 3 Testing in a virtual environment (K3) [160 Min] | 3.1 Test environment in general (K2) [30 Min] 3.1.1 Motivation for a test environment in the automotive development (K1) [5 Min] 3.1.2 General parts of a test environment (K1) [5 Min] 3.1.3 Differences between Closed-Loop and Open-Loop (K2) [15 Min] 3.1.3.1 Open-Loop-System 3.1.3.2 Closed-Loop-System 3.1.4 Essential interfaces, databases and communication protocols of a electronic control unit (K1) [5 Min] 3.2 Testing in XiL test environments (K3) [130 Min] 3.2.1 Model in the Loop (MiL) (K2) [20 Min] 3.2.1.1 Structure of a MiL test environment 3.2.1.2 Application areas and boundary conditions of a MiL test environment 3.2.2 Software in the Loop (SiL) (K1) [10 Min] 3.2.2.1 Structure of a SiL test environment 3.2.2.2 Application areas and boundary conditions of a SiL test environment 3.2.3 Hardware in the Loop (HiL) (K2) [20 Min] 3.2.3.1 Structure of a HiL test environmen 3.2.3.2 Application areas and boundary conditions of a HiL test environment 3.2.4 Comparison of the XiL test environments (K3) [80 Min] 3.2.4.1 Advantages and disadvantages oftesting in the XiL test environments 3.2.4.2 Allocation of test cases to one or more test environments 3.2.4.3 Classification of the XiL test environments (MiL, SiL, HiL) in the general V-model |
|
| 4 Automotive-specific static and dynamic test techniques [230 Min] | 4.1 Static test techniques (K3) [75 Min] 4.1.1 The MISRA-C: 2012 Guidelines (K2) [15 Min] 4.1.2 Quality characteristics for reviews of requirements (K3) [60 Min] 4.2 Dynamic test techniques (K3) [155 Min] 4.2.1 Condition testing, multiple condition testing, modified condition/decision testing (K3) [60 Min] 4.2.2 Back-to-Back-Testing (K2) [15 Min] 4.2.3 Fault injection testing (K2) [15 Min] 4.2.4 Requirements-based testing (K1) [5 Min] 4.2.5 Context-dependent selection of test techniques (K3) [60 Min] |
Cramtick's authentic study material entails both practice questions and practice test. iSQI CTFL-AuT exam questions and practice test are the best options to appear in the exam confidently and well-prepared. In order to pass the actual ISTQB Certified Tester Foundation Level - Automotive Software Tester CTFL-AuT exam in the first attempt, you have to work really hard on these iSQI CTFL-AuT questions, offering you with updated study guide, for the whole exam syllabus. While you are studying actual questions, you should also make use of the iSQI CTFL-AuT practice test for self-analysis and actual exam simulation by taking it. Studying again and again of actual exam questions will remove your mistakes with the ISTQB Certified Tester Foundation Level - Automotive Software Tester CTFL-AuT exam practice test. Online and windows-based, Mac-Based formats of the CTFL-AuT exam practice tests are available for self-assessment.
Automotive Software Tester | CTFL-AuT Questions Answers | CTFL-AuT Test Prep | ISTQB Certified Tester Foundation Level - Automotive Software Tester Questions PDF | CTFL-AuT Online Exam | CTFL-AuT Practice Test | CTFL-AuT PDF | CTFL-AuT Test Questions | CTFL-AuT Study Material | CTFL-AuT Exam Preparation | CTFL-AuT Valid Dumps | CTFL-AuT Real Questions | Automotive Software Tester CTFL-AuT Exam Questions
TESTED 16 May 2024
