Juniper JN0-452 Dumps Questions Answers

According to Wikipedia1, 802.1X is an IEEE Standard for port-based network access control (PNAC). It provides an authentication mechanism to devices wishing to attach to a LAN or WLAN using Extensible Authentication Protocol (EAP) over wired IEEE 802 networks and over 802.11 wireless networks, which is known as “EAP over LAN” or EAPOL.

The authentication process involves three parties: a supplicant (the client device), an authenticator (the network device such as an access point), and an authentication server (typically a RADIUS server). The supplicant must provide valid credentials to the authenticator before it can access the network resources.

The credentials are exchanged with a RADIUS server prior to the 4-way Handshake because the 4-way Handshake is used to establish encryption keys between the supplicant and authenticator after successful authentication2. The credentials are exchanged with a RADIUS server after the 802.11 Association because the 802.11 Association is used to establish a logical link between the supplicant and authenticator before authentication can take place3.

In Juniper Networks Mist AI Wireless, controlling client connection quality is a critical part of maintaining high Service Level Expectations (SLEs). One of the most effective ways to ensure good user experience is by enforcing a minimum acceptable RSSI (Received Signal Strength Indication) threshold for client devices. This functionality is implemented using wireless traffic filtering at the WLAN level.

Wireless traffic filtering allows administrators to define minimum and maximum RSSI thresholds that determine whether a client is permitted to associate or remain connected to an SSID. If a client’s RSSI falls below the configured minimum threshold, the AP can deny association requests or deauthenticate the client. This prevents low-signal or “sticky” clients from connecting at poor signal levels, which would otherwise result in excessive retries, low data rates, increased airtime consumption, and degraded performance for all users.

Mist applies these controls intelligently and surfaces their impact through AI-driven analytics. When low-RSSI clients are filtered, Mist can correlate improvements in throughput, latency, and roaming behavior directly to RF health and client quality metrics. This aligns with Mist best practices, which emphasize proactive client quality enforcement rather than reactive troubleshooting.

The incorrect options are explained as follows:

WLAN forwarding determines how traffic is bridged, tunneled, or NATed and has no impact on RSSI enforcement.

Geofencing is used for location-based services and RTLS use cases, not RF signal quality control.

WLAN rate limit restricts bandwidth usage per client or SSID but does not evaluate or enforce signal strength requirements.

Therefore, the correct feature required to set an acceptable minimum RSSI for client devices is wireless traffic filtering, which directly controls association behavior based on signal quality and helps maintain optimal wireless performance.

The exhibit shows a graph of the client’s roaming history over time. The x-axis represents the time and the y-axis represents the access point ID. Each dot on the graph indicates a roam event where the client switched from one access point to another.

The graph shows that the client roamed between different access points multiple times within a short period of time. This indicates that the client was experiencing frequent roams between different access points, which could affect its network performance and user experience.