Weekend Sale Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: cramtreat

Note! Following JN0-663 Exam is Retired now. Please select the alternative replacement for your Exam Certification. The new exam code is JN0-664

JN0-663 Service Provider Routing and Switching. Professional (JNCIP-SP) Questions and Answers

Questions 4

Which two statements are correct about Opaque LSAs in OSPF? (Choose two )

Options:

A.

Type 10 LSAs are used for MPLS traffic-engineering and have area scope.

B.

Type 11 LSAs are used for MPLS traffic-engineering and have area scope.

C.

Type 11 LSAs are used for MPLS label exchange and have link-local scope

D.

Type 9 LSAs are used for graceful-restart and have link-local scope

Buy Now
Questions 5

Exhibit:

Referring to the exhibit, you have recently established a Layer 3 VPN between PE-1 and PE-2, connecting the two CE sites. Rowing information is being shared between sites and the customer has two-way communication After adding this VPN to your core network, PE-1 and PE-2 are no longer able to forward traffic to the Internet.

In this scenario, what is the problem?

Options:

A.

You must configure the inet unicast NLRI for the BGP session on both your PE devices.

B.

You must configure a separate internal BGP group on both your PE devices specifically for Internet connectivity.

C.

You must configure the inet-vpn NLRI for the BGP sessions on both your PE devices.

D.

You must configure a multihop external BGP session between your PE devices and the Internet provider's ISP-A device.

Buy Now
Questions 6

Exhibit.

Referring to the exhibit, which statement is true?

Options:

A.

The BGP session between R1 and R2 will fail to establish correctly due to an NLRI mismatch

B.

The BGP session between R1 and R2 will establish correctly and the met unicast and the met6 unicast NLRIs will pass routing information

C.

The BGP session between R1 and R2 will establish correctly and only the inet6 unicast NLRI will pass routing information

D.

The BGP session between R1 and R2 will establish correctly and only the met unicast NLRI will pass routing information

Buy Now
Questions 7

The link between CE1 and PE1 has a history of flapping To avoid the impact that flapping causes to the network you decide to use route damping

Which statement is correct in this scenario?

Options:

A.

Dampened routes decay at a sliding rate known as half-life

B.

Routes become dampened when the configured max-suppress value is reached

C.

Dampening is enabled on interfaces

D.

Dampened routes become active when their figure of merit drops below the reuse value.

Buy Now
Questions 8

Exhibit:

R4 is directly connected to both RPs (R2 and R3). R4 is currently sending all joins upstream to R3 but you want to load balance the joins between both RPs

Referring to the exhibit, which configuration change will solve this issue?

Options:

A.

Configure the group-range parameter to be the same on R2 and R3

B.

Configure the bootstrap priority on R2 to be the same as R3.

C.

Configure the default route in inet.2 on R4 from R3 as the next hop to both R3 and R2.

D.

Configure the join-load-balance parameter under PIM on R4.

Buy Now
Questions 9

Exhibit:

R2 is receiving a route from R1 and you must ensure that the route is not advertised to R3.

Referring to the exhibit, which two configurations on R2 will solve the issue? (Choose two.)

Options:

A.

Apply the no-export policy as an import policy under group 65001.

B.

Apply the no-advertise policy as an export policy under group 65003.

C.

Apply the no-export policy as an export policy under group 65003.

D.

Apply the no-advertise policy as an import policy under group 65001.

Buy Now
Questions 10

Exhibit:

You are troubleshooting BGP routing issues between two MX Series routers. The BGP session is established but no BGP routes are being communicated.

What are two reasons for this problem? (Choose two.)

Options:

A.

The peer type should be external.

B.

No active BGP routes are in the inet.0 table

C.

table ii No export routing policy is applied.

D.

The peers are in different ASs.

Buy Now
Questions 11

You are creating an LDP-signaled Layer 2 circuit between two sites. Site1 and Site2 use different VLAN IDs to connect to your PE devices In this scenario, which encapsulation type must be used on the logical interfaces?

Options:

A.

vlan-bridge

B.

vlan-ccc

C.

vlan-tcc

D.

vlan-vpls

Buy Now
Questions 12

Exhibit:

Referring to the exhibit, traffic sent from CE-A2 to PE3 does not loop back to CE-A2 through PE2.

Which two EVPN functions accomplish this task? (Choose two.)

Options:

A.

split horizon

B.

aliasing

C.

multicast ingress replication

D.

designated forwarder election

Buy Now
Questions 13

You are asked to configure a series of interface policers and firewall filters, which include policers, on the same device You must ensure that the two configuration methods do not conflict.

What are two considerations when performing this task? (Choose two.)

Options:

A.

On inbound traffic, firewall filters are applied before interface policers.

B.

On outbound traffic, interface policers are applied before firewall filters.

C.

On outbound traffic, firewall filters are applied before interface policers.

D.

On inbound traffic, interface policers are applied before firewall filters.

Buy Now
Questions 14

Exhibit:

Referring to the exhibit, which two statements are correct? (Choose two.)

Options:

A.

R1 will never forward transit traffic through R2.

B.

Transit traffic from R1 to R4 will traverse R3.

C.

The OSPF interface metrics on R2 are all set to 65535.

D.

R2 stops sending LSAs into the network.

Buy Now

JNCIP-SP | JN0-663 Questions Answers | JN0-663 Test Prep | Service Provider Routing and Switching, Professional (JNCIP-SP) Questions PDF | JN0-663 Online Exam | JN0-663 Practice Test | JN0-663 PDF | JN0-663 Test Questions | JN0-663 Study Material | JN0-663 Exam Preparation | JN0-663 Valid Dumps | JN0-663 Real Questions | JNCIP-SP JN0-663 Exam Questions

Exam Code: JN0-663
Exam Name: Service Provider Routing and Switching. Professional (JNCIP-SP)
Last Update: Apr 14, 2023
Questions: 94