Weekend Sale Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: cramtreat

Note! Following H12-211 Exam is Retired now. Please select the alternative replacement for your Exam Certification.

H12-211 HCIA-Routing & Switching V2.5 Exam Questions and Answers

Questions 4

Which of the following statements are true according to the following configuration of a router?

Huawei]display ospfv3 interface GigabitEthernet 0/0/0 GigabitEthernet0/0/0 is up, line protocol is up

Interface ID 0x3 Interface MTU 1500 IPv6 Prefixes

FE80::2E0:FCFF:FE59:3498 (Link-Local Address)

2004::1/64

OSPFv3 Process (1), Area 0.0.0.0, Instance ID 0

Router ID 10.0.4.4, Network Type BROADCAST, Cost: 1 Transmit Delay is 1 sec, State Backup, Priority 1 Designated Router (ID) 10.0.2.2

Interface Address FE80::2E0:FCFF:FEBB:6CF9 Backup Designated Router (ID) 10.0.1.1 Interface Address FE80::2E0:FCFF:FEC6:4A10

Timer interval configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Hello due in 00:00:05

Neighbor Count is 3, Adjacent neighbor count is 2 Interface Event 2, Lsa Count 4, Lsa Checksum 0xf258

Interface Physical BandwidthHigh 0, BandwidthLow 1000000000

Options:

A.

The interface has three neighbor relationships

B.

The interface has three adjacencies

C.

The Router ID of the local router is 10.0.4.4

D.

The Router ID of the DR is 10.0.2.2

Buy Now
Questions 5

Which of the following can prevent host A and Host B from communicating with each other?

Options:

A.

acl number 2000

rule 5 deny source 100.0.12.0 0.0.0.255

#

interface G0/0/1

traffic-filter outbound acl 2000

B.

acl number 2000

rule 5 deny source 100.0.12.0 0.0.0.255

#

interface G0/0/2

traffic-filter inbound acl 2000

C.

acl number 2000

rule 5 deny source 100.0.12.0 0.0.0.255

#

interface G0/0/1

traffic-filter inbound acl 2000

D.

acl number 2000

rule 5 deny source 100.0.12.0 0.0.0.255

#

interface G0/0/3

traffic-filter inbound acl 2000

Buy Now
Questions 6

Which of the following statements is true about an STP-enable port in forwarding state?

Options:

A.

The port forward user traffic and processes BPDUs

B.

The port only receive and processes BPDUs and does not forward user traffic

C.

The port does not process BPDUs or forward user traffic

D.

The port creates MAC address entries based on the received user traffic but does not forward user traffic

Buy Now
Questions 7

The Multicast address FF02::2 indicate all routers within the link-local scope?

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 8

The users who log on the router through Telnet are not permitted to configure IP address. What is the possible reason

Options:

A.

Communication failures occur between the user and the router

B.

The authentication mode of Telnet os set incorrectly

C.

Privilege level of Telnet is set incorrectly

D.

SNMP parameters are set incorrectly

Buy Now
Questions 9

On the network shown in the figure, when planning traffic, the network administrator requires that the data packet sent from host A to host B pass through G0/0/3 on the router, and the packets sent from host B to host A pass through G0/0/4 on the router, which of the following command can be used to meed this requirement?

Options:

A.

Router A : ip route-static 10.0.12.5 255.255.255.252 11.0.12.2

Router B : ip route-static 10.0.12.1 255.255.255.252 11.0.12.5

B.

Router A : ip route-static 10.0.12.5 255.255.255.252 11.0.12.6

Router B : ip route-static 10.0.12.1 255.255.255.252 11.0.12.1

C.

Router A : ip route-static 0.0.0.0 0.0.0.0 11.0.12.2

Router B : ip route-static 0.0.0.0 0.0.0.0 11.0.12.5

D.

Router A : ip route-static 0.0.0.0 0.0.0.0 11.0.12.6

Router B : ip route-static 0.0.0.0 0.0.0.0 11.0.12.1

Buy Now
Questions 10

Which of the following packets is used by the DHCPv6 server to reply to solicit packets ?

Options:

A.

Advertise

B.

Offer

C.

Reply

D.

Request

Buy Now
Questions 11

Segment routing (SR) can be used to define an explicit path. Nodes on a network only need to maintain SR information to deal with the real time and rapid development of services. What are the characteristics or SR?

Options:

A.

SR supports smooth evolution of the existing network by extending protocol (such as IGPs)

B.

SR supports both the controller’s centralized control mode and forwarders distributed control mode, providing a balance between the two modes

C.

SR uses the source routing technology to support fast interaction between the network layer and upper- layer applications

D.

SR uses IP forwarding, and router do not need to maintain another label forwarding table

Buy Now
Questions 12

For STP the default root path cost of the root bridge is 0?

Options:

A.

True

B.

False

Buy Now
Questions 13

ACLs on AR G3 series routers , support configuration and auto sequence

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 14

display startup MainBoard:

Startup system software: flash:/AR2220E-V200R007C00SPC600.cc Next startup system software: flash:/AR2220E-V200R007C00SPC600.cc

Backup system software for next startup: null

Startup saved-configuration file: flash:/vrpcfg.zip Next startup saved-configuration file: flash:/vrpcfg.zip Startup license file: null

Next startup license file: null

Startup patch package: null Next startup patch package: null Startup voice-files: null

Next startup voice-files: null

The preceding information is the 'Display startup" command output on the AR2220 router. Which of the following statement is false about Such information?

Options:

A.

The running Configuration file is not Saved.

B.

The System file used for this startup is AR2220E-V200R007C00SPC600.cc

C.

The System file for next startup cannot be modified.

D.

You can run the 'startup system software' command to modify the system file for next startup

Buy Now
Questions 15

The VLAN ID cannot be set to 0

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 16

As Shown in the figure, host A and host B cannot communicate with each other?

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 17

Which of the following ACLs cannot match network layer information?

Options:

A.

Basic ACL

B.

Advanced ACL

C.

Layer 2 ACL

D.

User ACL

Buy Now
Questions 18

What is the default interval for sending OSPF Hello packets on a broadcast network?

Options:

A.

10s

B.

20s

C.

30s

D.

40s

Buy Now
Questions 19

How many TCP connections will be established when FTP is used to transfer files?

Options:

A.

1

B.

2

C.

3

D.

4

Buy Now
Questions 20

The following commands output is displayd on an STP port on a swith. Which of the following statements is false?

display stp interface GigabitEthernet 0/0/1

-------[CIST Global Info][Mode STP]------- CIST Bridge:32768.4c1f-cc93-3356

Config Times:Hello 4s MaxAge 20s FwDly 15s MaxHop 20

Active Times:Hello 2s MaxAge 20s FwDly 15s MaxHop 20 CIST Root/ERPC:0 .4c1f-cc7f-3216 / 0

CIST RegRoot/IRPC :32768.4c1f-cc93-3356 / 0The interval at which the port sends configuration BPDUs is 2 seconds

Options:

A.

The Max Age timer for configuration BPDUs is set to 20 seconds

B.

The Forward Delay timer is set to 20 seconds

C.

The switch is not a root bridge

Buy Now
Questions 21

NAPT uses the same public IP address but different port number to translate private IP addresses. Which statement regarding the port number is correct

Options:

A.

It is necessary to configure port mapping manually

B.

It is only necessary to configure the port number range

C.

It is not necessary to configure port number

D.

An access control list is needed to assign port number

Buy Now
Questions 22

Which of the following statements are true about the default route?

Options:

A.

If the destination address of a packet does not match any entry in the routing table, the packet is forwarded through the default route

B.

In a routing table, the route to 0.0.0.0 (with the mask being 0.0.0.0) is the default route

C.

The routing table of any router must contain the default route

D.

The default route can only be manually configured by the administrator

Buy Now
Questions 23

Which of the following information must be configured for a DHCPv6 relay agent?

Options:

A.

DHCPv6 DUID

B.

IPv6 address of the DHCPv6 server

C.

DHCPv6 address pool

D.

DNS server address

Buy Now
Questions 24

Which of the following must be consistent at both ends of an OSPF adjacency relationship to be established

Options:

A.

Router Priority

B.

Router Dead Interval

C.

Router ID

D.

Area ID

Buy Now
Questions 25

Which of the following network types does OSPF support ?

Options:

A.

Point- to- point

B.

Broadcast

C.

Non- Broadcast Multi - Access

D.

Point -to- Mutilpoint

Buy Now
Questions 26

What are the functions of the DR and BDR in OSPF?

Options:

A.

Reduce the time taken for establishing the OSPF adjacency relationship

B.

Reduce the number of OSPF Neighbors

C.

Reduce the number of times link state information is exchanged

D.

Reduce the types of OSPF packets

Buy Now
Questions 27

SR encapsulates the segment list identifying a forwarding path into a data packet header for transmission After receiving the data packet, the receiver end parses the segment list. If the top SID of the segment list belongs to the local node, the top SID is popped out, and then further processing is perfermed, if the top SID of the segment list does not belong to the local node, the data packet is forwarded to the next node in equal cost multiple path(ECMP) mode?

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 28

The solicited-node multicast address consists of the prefix FF02::1:FF00:0/104 and the last 24 bits of the corresponding unicast address

Options:

A.

TRUE

B.

FALSE

C.

quit

Buy Now
Questions 29

Which of the following IPv6 addresses corresponds to the solicited -node multicast address of FF02::1:FFAB:FECA?

Options:

A.

2020::FFAB:FECA

B.

2020::EEAB:FECA

C.

2020::FFBA:FECA

D.

2020::FFBA:FECA

Buy Now
Questions 30

On Huawei switches, you can run the vlan batch commands to create multiple VLANs in batches

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 31

The management information base (MIB) is a virtual Database that is stored on the NMS?

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 32

The DHCP server function is enabled on an interface of a route. What gateway address will be obtained by the DHCP CLIENT?

Interface GigabitEthernet0/0/1

Ip address 11.0.1.1 255.255.255.0

dhcp select interface

dhcp server excluded-ip-address 11.0.1.2 11.0.1.127

Options:

A.

11.0.1.1

B.

11.0.1.100

C.

11.0.1.254

D.

11.0.1.255

Buy Now
Questions 33

Which of the following options is the simplest form of IPv6 address 3001:0DB8:0000:0000:0346:ABCD:42BC:8D58?

Options:

A.

3001:DB8::346:ABCD:42BC:8D58

B.

3001:0DB8::0000:0346:ABCD:42BC:8D58

C.

3001:0DB8::0346:ABCD:42BC:8D58

D.

3001:DB8::0346:ABCD:42BC:8D58

Buy Now
Questions 34

Refer to the configuration output, Which of the following statements regarding the configuration output are correct?

[Huawei-Gigabitethernet0/0/1]port link-type access [Huawei-Gigabitethernet0/0/1]port default vlan 10 [Huawei-Gigabitethernet0/0/2]port link-type trunk

[Huawei-Gigabitethernet0/0/2]port trunk allow-pass vlan 10

Options:

A.

The PVID on interface GIgabitEthernet0/0/1 is 10

B.

The PVID on interface GigabitEthernet0/0/1 is 1

C.

The PVID on interface GigabitEthernet0/0/2 is 10

D.

The PVID on interface GigabitEthernet0/0/2 is 1

Buy Now
Questions 35

Which of the following address types are of IPv6 addresses?

Options:

A.

Unicast address

B.

Anycast address

C.

Multicast address

D.

Broadcast address

Buy Now
Questions 36

In STP , when a designated port receives an inferior configuration BPDU, the designated port immediately sends its own configuration, BPDU to the downstream device?

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 37

Which of the following field exits in both IPv6 and IPv4 packet headers?

Options:

A.

Source Address

B.

Destination Address

C.

Version

D.

Next Header

Buy Now
Questions 38

As shown in Figure, Which of the following port will become the designated port?

Options:

A.

G0/0/3 of SWB

B.

G0/0/1 of SWC

C.

G0/0/2 of SWC

D.

G0/0/3 of SWA

Buy Now
Questions 39

All interface on a router running OSPF must belong to the same area

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 40

Which commands can be used to check the PPPoE client session status?

Options:

A.

display ip interface brief

B.

display current – configuration

C.

display pppoe-client session packet

D.

display pppoe-client session summary

Buy Now
Questions 41

Which of the following bits are used in the Flag field in the RSTP configuration BPDU but not used in the Flag field in the STP

Options:

A.

TCA

B.

TC

C.

Proposal

D.

Agreement

Buy Now
Questions 42

As shown in the figure the host has ARP cache. Host A sends a data packet to host B. Which of the following are the destination MAC address and destination IP address of the data packet?

Options:

A.

MAC –A, 11.0.12.1

B.

MAC –B, 11.0.12.1

C.

MAC –C, 11.0.12.1

D.

MAC –C, 11.0.12.2

Buy Now
Questions 43

The Following Figure shows the network topology and OSPF area partition. Router R2, R3 and R4 are OSPF ABR's but R1 is Not?

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 44

The solicited-node multicast address corresponding to the IPv6 address 2001::12:1 is FF02::1:FF12:1

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 45

Which of the following parameters is not used by advanced ACL

Options:

A.

Source interface

B.

Destination Port number

C.

Protocol number

D.

Time-range

Buy Now
Questions 46

After a network administrator enable the traceroute function on a router what is the value of the “TTL” field in the IPv4 header of the first data packet sent by the router?

Options:

A.

0

B.

1

C.

254

D.

255

Buy Now
Questions 47

Which of the following statement is true about root bridge election of STP?

Options:

A.

If the bridge priorities of device are the same, the device with the largest MAC address becomes the root bridge

B.

The device with the largest bridge priority becomes the root bridge

C.

The device with the smallest bridge priority becomes the root bridge

D.

If the bridge priority are the same, the device with the largest number of ports becomes the root bridge

Buy Now
Questions 48

Which is the default value of switch priority when STP is enabled on Huawei switch

Options:

A.

4096

B.

8192

C.

16384

D.

32768

Buy Now
Questions 49

The Routing table on R1 is as follows. Which of the following statement is true?

display ip routing-table

Route Flags: R - relay, D - download to fib

------------------------------------------------------------------------------

------------------------------------------------------------------------------

Routing Tables: Public Destinations : 7Routes : 7

Destination/Mask Proto Pre CostFlags NextHopInterface

10.0.2.2/32 Static 600D10.0.12.2Ethernet0/0/0

10.0.3.3/32 Static 600D10.0.2.2Ethernet0/0/0

10.0.12.0/24 Direct 00D10.0.12.1Ethernet0/0/0

10.0.12.1/32 Direct 0 0D 127.0.0.1Ethernet0/0/0

Options:

A.

The Next hope of route destined for 10.0.3.3/32 is not directly connected. As a result, the router does not forward data packets with the destination IP address 10.0.3.3

B.

The Router forwards data packets with the destination IP address 10.0.3.3 through Eth0/0/0

C.

The Router forwards data packets with the destination IP address 10.0.2.2 through Eth0/0/0

D.

The Router forwards data packets with the destination IP address 10.0.12.1 through Eth0/0/0

Buy Now
Questions 50

What is the UDP port number used by the DHCPv6 server?

Options:

A.

546

B.

547

C.

548

D.

549

Buy Now
Questions 51

How does a trunk port process data frames?

Options:

A.

If the VLAN ID is the same as the PVID of the port and the port allow traffic with this VLAN ID to pass through the port removes the VLAN tag from the data frames and forward them

B.

If the VLAN ID is different from the PVID of the port the port removes the VLAN tag from the data frames and then forwards them

C.

If the VLAN ID is different from the PVID of the port, the port replaces the VLAN tag of the data frames and then forward them

D.

When the VLAN ID is different from the PVID of the port, the port discard the data frames

Buy Now
Questions 52

As shown in Figure, Host A and Host B cannot communicate with each other?

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 53

Which of the following commands line views exist on the Versatile Routing Platform

Options:

A.

User view

B.

System view

C.

Protocol view

D.

Interface view

Buy Now
Questions 54

Which of the following statements about node segments is false

Options:

A.

Node segments are special prefix segments

B.

A node segment is used to identify a specific node

C.

The node SID must be different from the prefix SID of the node

D.

undo interface Eth-trunk-1

Buy Now
Questions 55

::1/128 is an IPv6 loopback address

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 56

Which of the following packets are OSFP packets?

Options:

A.

Hello

B.

LSR

C.

LSU

D.

LSA

Buy Now
Questions 57

UDP does not guarentee data transmission reliability and does not provide packet sorting and traffic control functions . It is suitable for the traffic that has low requirements for data tramission reliability, but high requirements for the transmission

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 58

NAPT differentiates IP addresses of different users based on protocol ID in TCP,UDP, or IP packet?

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 59

Which of the following routing protocols are dynamic routing protocols ?

Options:

A.

Static Routing

B.

Direct Routing

C.

OSPF

D.

BGP

Buy Now
Questions 60

Which of the following statement are true about the OSPF neighbor status

Options:

A.

The master/slave relationship of OSPF is formed in the ExStart state

B.

The sequence number of DD packet is determined in the Exchange state

C.

In the Exchange state, routers send DD packets that briefly describe link state information to each other to describe the content of the local link state database (LSDB)

D.

After LSDB synchronization is completed, the route state changes to full

Buy Now
Questions 61

Which of the following statements is true about the forward Delay timer of STP?

Options:

A.

Improves the STP convergence speed

B.

Reduces the interval for sending BPDUs

C.

Prevent temporary loops

D.

Delay is required when a port transitions between Blocking and Disabled

Buy Now
Questions 62

Which of the following IPv4 addresses can be directly used by a host to access the internet ?

Options:

A.

192.168.1.1/24

B.

10.255.255.254/24

C.

172.16.255.254/24

D.

172.32.1.1/24

Buy Now
Questions 63

All interface on a router belongs to the same broadcast domain?

Options:

A.

True

B.

False

Buy Now
Questions 64

To provide the information about the IP addesses that a user packet traverses along the path to the destination, which of the following does Tracert record in each expired ICMP TTL packet

Options:

A.

Destination port

B.

Source port

C.

Destination IP address

D.

Source IP address

Buy Now
Questions 65

When the host accesses web service of the server , the value of the 'protocol' field at the network layer is 6.

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 66

The DHCPv6 server adds the management address configuration flag (M) to an RA packet . If M is set to 1, which of the following statements is true ?

Options:

A.

DHCPv6 stateful address configuration is enabled on the client

B.

IPv6 stateless address autoconfiguration is enabled on the client

C.

The client needs to use stateful DHCPv6 to obtain other network configuration parameters.

D.

The client needs to use stateless DHCPv6 to obtain other network configuration parameters.

Buy Now
Questions 67

An ACL does not filter traffic generated by the huawei device towards other devices, but only filters forwarded traffic including traffic generated by other devices to access the Huawei device.

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 68

DHCPv6 Packet are carried using () packets?

Options:

A.

UDP

B.

TCP

C.

HTTP

D.

FTP

Buy Now
Questions 69

Static NAT can only implement one-to-one mapping between private and public addresses

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 70

SNMPv1 defines five protocol operations

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 71

The load balancing modes at both ends of an Eth-Trunk can be different

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 72

The IKE protocol is used to set up an SA for IPsec automatic negotiation. Identity authentication can be performed when the IP address of the initiator changes dynamically

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 73

On P2P networks , OSPFv3 does not need to send DD packets when establishing an OSPFv3 adjacency?

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 74

When a host uses the IP address 192.168.1.2 to access the internet , NAT must be performed

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 75

Before forwarding IPv6 packets routers do not need to re-encapsulate the data link layer?

Options:

A.

True

B.

False

Buy Now
Questions 76

A trunk interface and a hybrid interface process packet in the same way when receiving data frames?

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 77

Which field in the IPv6 packet header can be used for QOS?

Options:

A.

Traffic Class

B.

next header

C.

version

D.

Payload length

Buy Now
Questions 78

According to the following configuration of Router C, how many Global unicast address prefixes are advertised by Router C?

Huawei]display ospfv3 interface GigabitEthernet 0/0/0 GigabitEthernet0/0/0 is up, line protocol is up Interface ID 0x3

Interface MTU 1500 IPv6 Prefixes

FE80::2E0:FCFF:FE59:3498 (Link-Local Address) 2003::1/64

2005::1/64

2009::1/64

OSPFv3 Process (1), Area 0.0.0.0, Instance ID 0

Router ID 10.0.4.4, Network Type BROADCAST, Cost: 1 Transmit Delay is 1 sec, State Backup, Priority 1 Designated Router (ID) 10.0.2.2

Interface Address FE80::2E0:FCFF:FEBB:6CF9

Backup Designated Router (ID) 10.0.1.1 Interface Address FE80::2E0:FCFF:FEC6:4A10

Options:

A.

1

B.

2

C.

3

D.

4

Buy Now
Questions 79

On a serial interface you can configure a static route by spending the next hop address or outbound interface ?

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 80

As define in RSTP to improve the convergence speed you can define the port that is directly connected to a terminal as the ( )

Options:

A.

Fast port

B.

Backup port

C.

Root port

D.

Edge port

Buy Now
Questions 81

According to the configuration of the single-armed routing in the following figure, the administrator department and finance department can communicate with each other even if proxy ARP is disabled on subinterface of R1?

Options:

A.

True

B.

False

Buy Now
Questions 82

An ACL rule is as follows. Which of the following IP address can be matched by the permit rule? rule 5 permit ip source 10.1.1.0 255.0.254.255?

Options:

A.

9.1.1.1

B.

8.2.2.1

C.

7.1.2.1

D.

6.1.3.1

Buy Now
Questions 83

Which of the following types of routes can be used by a router to establish a routing table ?

Options:

A.

Direct Route

B.

Dynamic Route

C.

Static Route

D.

Aggregated Route

Buy Now
Questions 84

What are the advantages of using DHCP to allocate IP addresses

Options:

A.

DHCP provides heavy workload and is difficult to manage

B.

DHCP can prevent IP address conflicts

C.

IP addresses can be reused

D.

If the configuration information changes, for example the DNS server address changes, the administrator only needs to modify the configuration information on the DHCP server, facilitating unified managemnet

Buy Now
Questions 85

Which layer of the OSI reference model does a switch work at?

Options:

A.

Network layer

B.

Data link layer

C.

Physical layer

D.

Transport layer

Buy Now
Questions 86

A window Host is started for the first time. If the Host obtains the IP address using DHCP, what is the source IP address of the first data packet sent by the host?

Options:

A.

0.0.0.0

B.

127.0.0.1

C.

169.254.2.33

D.

255.255.255.255

Buy Now
Questions 87

Which of the following statements is true about link aggregation in manual load balancing mode ?

Options:

A.

In manual load balancing mode, all active interfaces forward data and load balance traffic.

B.

A maximum of four active interfaces can be configured in manual load balancing mode.

C.

In manual load balancing mode, devices at both ends of a link send LACPDUs to each other.

D.

The number of active interfaces can be set in manual load balancing mode.

Buy Now
Questions 88

In RSTP, an edge port becomes a common STP port after receiving a Configuration BPDU.

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 89

Which of the following IPv6 addresses is /are permanent multicast address(es)?

Options:

A.

FF02::1

B.

FF02::2

C.

FF12::1

D.

FF12::2

Buy Now
Questions 90

Which of the following methods are supported by VRP to configure the router?

Options:

A.

Through the Console Port

B.

Through Telnet

C.

Through the Aux port

D.

Through FTP

Buy Now
Questions 91

In Huawei Devices, when NAPT uses a dynamic address pool, addresses in the pool can be used repeatedly. That is, one IP address can be mapped to multiple intranet IP addresses

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 92

Packet forwarded between two routers do not carry VLAN tags?

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 93

Which of the following parameters is used to elect Root Bridge in STP?

Options:

A.

Bridge ID

B.

Port ID

C.

Root Path Cost

D.

System Name of the Switch

Buy Now
Questions 94

The TCP protocol uses the three-way handshake mechanism to establish and disable connections. Therefore, TCP support reliable data?

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 95

Which of the following statement about gratuitous ARP packet are true?

Options:

A.

A system can determine whether conflicting IP addresses are used by sending a gratuitous ARP packet

B.

A gratuitous ARP packet uses the same format as an ARP request packet

C.

A gratuitous ARP packet can help to update an IP address

D.

A gratuitous ARP packet uses the same format as an ARP reply packet

Buy Now
Exam Code: H12-211
Exam Name: HCIA-Routing & Switching V2.5 Exam
Last Update: Apr 14, 2023
Questions: 317