H12-425 HCIP-Data Center Facility Deployment Questions and Answers

The Maximum distance of WIFI coverage for WIFI converter is ( )m.

When load rate is low and stable, partial power modules of UPS could enter into hibernation, the remaining power modules undertake the larger loads, which improves system efficiency.

The BCB-BOX provides overload and short-circuit protection as well as remote trip control.

ECC800 can provide () functions.

For NetCol5000-A installation, the required time of preserving positive pressure is ( ) hours.

First time powering on UPS5000-E, make sure that the UPS main input switch, bypass switch, output switch, maintenance bypass switch and battery switch are all OFF

On the NetEco, the door name can’t be modified.

Users can modify the login password on the ( ) menu of the ECC800 WebUI.

Where is the recommended installation location for the Smart ETH socket?

In the FusionModule1000, all surface-mounted fire control cables are rounded through metal hoses to prevent damage in case of fire.

The ATS/MCCB input unit of an integrated UPS is used to ( ).

Users can monitor devices such as UPS and air conditioner on ECC800.

During Nitrogen injecting, a pressure relief valve must be installed on the nitrogen cylinder.

In direct ventilation mode, the direct ventilation system exchanges heat between outdoor cool air and indoor hot air.

If a fire occurs in the FusionModule1000, the gas release indicator will display “DON’T ENTER WHILE RELEASING GAS”

When doing maintenance of UPS5000-E, make sure loads continue to powered, we should first perform EPO and then turn the maintenance bypass switch.

When the temperature detector or smoke detector in the FusionModule1000 generates an alarm, ( ) emits a continuous beeping sound to remind you to take measures as soon as possible to avoid a major accident.

2.4G antenna of ECC800 should be connected to ( ).

The preset password of UPS2000-G-(6-20 kVA) panel is ()

To avoid voltage unbalance between batteries, batteries need to do ( ) in period.

When a backfeed occurs in main or bypass, the backfeed protection card can send signals to trip the input circuit breaker.

The compressor suction pressure of NetCol5000-A25kW is low. It is possible that ().

The preset battery equalized charging voltage of UPS2000-G-(6-20K) is () V/cell.

Which component does not support wireless networking?

Historical data can be exported from the ECC800.

When a short circuit occurs in a battery, the charging voltage of the faulty battery is ().

NetCol5000-A eliminate partial hot spots by in-row cooling.

The Ibat2.0, optional component of the UPS5000-E, can detect () of each battery.

The ( ) is used to convert PoE signals into WIFI signals.

To shut down one UPS in UPS2000-G-20kVA parallel system, you must ().

On the NetEco, users can viewed detailed camera information such as the camera name, code, IP address.

Backup time of battery depends on discharge current of battery.

NetEco can’t manage the data center facilities in different places.